Inspections · Repairs · Roofing Options
Roof assessments, repair work and practical options for commercial buildings.
A warehouse preparing for renovation has different priorities from a healthcare facility or a convenience store addressing active leaks. We start with the roof condition, the way the building is used and the decision an owner needs to make.
Where the roof allows it, targeted repairs, phased work and retaining sound materials may be worth considering. Where deterioration makes that impractical, we explain the larger corrective path and its tradeoffs. These projects show the building type, the roof conditions and the work that was considered or completed.
Clearwater area, FL · Business park
Two leaking PBR metal roofs totaling 37,793 square feet, failed coatings, retrofit and replacement alternatives, and a separate 500-square-foot panel proposal.
Explore the project →
Columbus area, Ohio · Healthcare facility
A Columbus healthcare facility needed attention at multiple defects in its existing TPO roof. The roof assessment led to temporary patching at 22 locations, with work focused on the membrane field, wall transitions and raised roof details.
Explore the project →
Columbus area, Ohio · Apartment building
An apartment building in Columbus received a focused roof service visit: inspect the drains, clean the membrane and patch one hole in the TPO covering. The work addressed a small repair need without expanding it into a roof-replacement project.
Explore the project →
Richmond metro area, Virginia · Vacant warehouse
A vacant warehouse near Richmond needed temporary leak control ahead of renovation and a planned roof replacement. Damaged membrane, exposed insulation and water inside the building required an immediate repair discussion alongside the longer-term roofing plan.
Explore the project →
Charleston area, South Carolina · Convenience store and fuel station
A Charleston-area convenience store needed localized repairs to an existing metal roof. Approximately 700 square feet of work addressed surface deterioration, fasteners, panel defects and penetration details, followed by compatible recoating.
Explore the project →
Lakewood, Tacoma area, Washington · Industrial warehouse
Leaks at an industrial warehouse in the Tacoma area prompted a review of two roofing needs: a corrugated-metal roof and a separate low-slope corner. CRA evaluated the information available to plan an inspection and compare repair, coating and replacement options.
Explore the project →
Louisville area, Kentucky · Office and logistics facility
A 65,000-square-foot office and logistics building in the Louisville area combines a low-slope TPO roof with a larger sloped standing-seam metal roof. A condition inspection of both systems found the TPO section beyond the point where repairs would be reliable and identified a recurring installation defect across the metal roof's valleys.
Explore the project →
Reading area, Pennsylvania · Commercial building
A standing-seam metal roof in the Reading area shows the kind of scattered maintenance history that comes from years of chasing individual leaks: mastic patches at panel seams, box-gutter corrosion, and open joints at parapet corners. A site visit documented current conditions ahead of a repair scope.
Explore the project →
Greece area, New York · Convenience store building
A Greece-area convenience store needed a close review of recurring leak details at a low-slope metal roof. The roof walk documented panel laps, wall transitions, rooftop equipment curbs and drainage paths so the next scope could address the conditions actually present.
Explore the project →
Westchester County, New York · Commercial cinema building
A Westchester County cinema reported water entering in two areas. The rooftop review documented standing water, a drain opening, a roof-edge channel and transitions beside rooftop equipment so a repair scope could address the details that were actually holding water.
Explore the project →
Mohawk Valley, New York · Commercial metal building
A commercial metal building in the Mohawk Valley needed its roof condition reviewed from both sides of the assembly. The field record combines exterior roof views with interior views of the metal deck, insulation and steel framing, giving ownership a clearer basis for repair and capital-planning decisions.
Explore the project →
Billings area, Montana · Fast-casual restaurant building
A Billings-area restaurant needed a focused response to a roof leak at a low-slope commercial roof. The completed field record documents the membrane, rooftop equipment, curb transitions and localized repair work, giving the owner a clear account of what was addressed and what to monitor next.
Explore the project →
Monroe area, North Carolina · Highway travel center building
A Monroe-area travel center reported water entry and needed the low-slope roof reviewed before a repair scope was finalized. The field record documents the membrane surface, a localized roof detail and areas where water could hold near rooftop equipment.
Explore the project →
Columbus area, Ohio · Indoor entertainment venue
A Columbus-area indoor entertainment venue needed a disciplined review of recurring water entry around roof, wall and exterior-transition details. The preliminary field assessment documented the conditions that required follow-up testing before any repair quantities or trade responsibilities could be finalized.
Explore the project →
Louisville, Kentucky · Historic church campus
A historic Louisville church campus needed a proposal for a small flat-roof replacement where modern membrane work meets original slate and decorative copper. The planning record focused on protecting those character-defining materials while giving the owner a clear choice about the roof assembly.
Explore the project →
Kissimmee, Florida · Quick-service restaurant
A Kissimmee quick-service restaurant had recurring water-management concerns at roof-wall transitions and around rooftop equipment. The proposal documented the observed conditions and gave the owner two distinct paths: a mechanically fastened membrane layover or a silicone restoration, subject to testing.
Explore the project →
Liverpool, New York · Fuel and convenience site
A Liverpool fuel and convenience site had a low-slope roof with aging repairs, ponding water and detail conditions around mechanical equipment. The proposal set out a silicone-coating path that begins with preparation and localized correction, rather than treating a coating as a shortcut over unresolved defects.
Explore the project →
Williamsville, New York · Fuel and convenience site
A Williamsville fuel and convenience site had an aging low-slope roof with ponding water, recurring patching and equipment-area concerns. The revised proposal gave the owner two mutually exclusive paths: a full single-ply replacement with drainage work or a silicone restoration after the roof is prepared and its existing assembly is confirmed eligible.
Explore the project →Tell us about the building, the current problem and your plans. We can help separate immediate repair needs from longer-term work, with a clear explanation of scope, disruption and cost considerations.
Request a roof review